26
Accessing the switch for the first time
Setting up the configuration environment
The first time you access the switch you must use a console cable to connect a console terminal, for
example, a PC, to the console port on the switch.
Figure 30 Connecting the console port to a terminal
Connecting the console cable
Console cable
A console cable is an 8-core shielded cable, with a crimped RJ-45 connector at one end for connecting
to the console port of the switch, and a DB-9 female connector at the other end for connecting to the
serial port on the console terminal.
Figure 31 Console cable
Connecting the console cable
To connect a terminal device to the switch by using the console cable:
1. Plug the DB-9 female connector of the console cable to the serial port of the console terminal or PC.
To Next Page
Loading...
