H3C S5120-EI Series - Appendix C Frus and Compatibility Matrixes; Interface Cards; SFP;SFP+;XFP Transceiver Modules and SFP+;CX4 Cables

50
Appendix C FRUs and compatibility matrixes
Interface cards
Table 21 describes the interface cards that you can choose for the S5120-28C-EI, S5120-52C-EI,
S5120-28C-PWR-EI, and S5120-52C-PWR-EI switches that provide interface card slots.
Table 21 Description of the supported interface cards
Card model Name Description Remarks
LSPM2GP2P
2-port GE SFP optical
interface card
Provides two Gbps SFP
fiber ports
Supports SFP transceiver modules
(except SFP-GE-T) listed in Table 22
LSPM2SP2P
2-port 10 GE SFP+
optical interface card
Provides two 10 Gbps
SFP+ fiber ports
Supports SFP+ transceiver modules
and SFP+ cables listed in Table 23
LSPM1XP2P
2-port 10 GE XFP
optical interface card
Provides two 10 Gbps
XFP fiber ports
Supports XFP transceiver modules
listed in Table 24
LSPM1XP1P
1-port 10 GE XFP
optical interface card
Provides one 10 Gbps
XFP fiber port
LSPM1CX2P
Short-haul 2-port 10 GE
CX4 interface card
Provides two 10 Gbps
copper ports
Supports CX4 cables listed in Table
25
LSPM1XGT2P
2-port 1/10GBase-T
interface card
Provides two
1/10GBase-T Ethernet
ports
N/A
NOTE:
For more information about the interface cards, see the user manuals of the interface cards.
SFP/SFP+/XFP transceiver modules and SFP+/CX4
cables
Table 22 GE SFP transceiver modules
Transceiver module
Central
wavelen
g
th
Connector Fiber
Max transmission
distance
SFP-GE-SX-MM850-A 850 nm LC
50/125 μm multimode
optical fiber
550 m (1804.46 ft)
62.5/125 μm
multimode optical fiber
275 m (902.23 ft)
SFP-GE-LX-SM1310-A
1310 nm LC
9/125 μm single mode
optical fiber
10 km (6.21 miles)
SFP-GE-LH40-SM1310 40 km (24.86 miles)