3-32
Powering on the switch
During the startup process, you can access Boot ROM menus to perform tasks such as software
upgrade and file management. The Boot ROM interface and menu options differ with software
versions. For more information about Boot ROM menu options, see the software-matching release
notes for the device.
After the startup process is completed, you can access the CLI to configure the switch.
For more information about the configuration commands, see H3C S6520X-EI & S6520X-HI Switch
Series Configuration Guides and H3C S6520X-EI & S6520X-HI Switch Series Command
References.
To Next Page
Loading...
Need help?
General