66
Figure 133 Citrix 7.1 GUI
If a storage controller has been installed on the server, install
the
driver for the storage controller as
shown
in "Installing a storage controller driver by using an .rpm file (for RedHat OSs)"as a best
Installing a Ubuntu OS
The installation procedures are similar for different Ubuntu OS versions. This example installs
Ubuntu 14.10 and the storage controller driver.
Make sure both the OS image and the storage controller driver file have been mounted to the server.
Restrictions and guidelines
Install the RAID controller driver package by following the procedures in the Readme packed with
the RAID controller driver package obtained from the Ubuntu website.
If the system displays that the driver name is in use when you remove the driver shipped with the
kernel by executing the
modpobe –r driver_name or rmmod driver_name command, it
indicates that the hard drive connected to the storage controller has the system disk where the
controller is created. In this case, do not remove the driver until you are prompted or reboot the
server and then enter the BIOS Setup Utility to delete the original logical disk, create a new disk and
then continue installation.
Procedure
1. Enter the BIOS and select boot options. For more information, see "Selecting the boot media."
2. Select Install Ubuntu Server, and then press Enter.
To Next Page
Loading...
Need help?
General
