H3C WA2600 series Command Reference

4-6
Description
Use the display arp timer aging command to display the age timer for dynamic ARP entries.
Related commands: arp timer aging.
Examples
# Display the age timer for dynamic ARP entries.
[Sysname] display arp timer aging
Current ARP aging time is 10 minute(s)
naturemask-arp enable
Syntax
naturemask-arp enable
undo naturemask-arp enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the naturemask-arp enable command to cancel the restriction that ARP requests must be from
the same subnet. In this case, ARP requests from a natural network are supported.
Use the undo naturemask-arp enable command to restore the default.
By default, the support for ARP requests from a natural network is disabled.
Examples
# Enable the support for ARP requests from a natural network.
<Sysname> system-view
[Sysname] naturemask-arp enable
reset arp
Syntax
reset arp { all | dynamic | static | interface interface-type interface-number }
View
User view
Default Level
2: System level
Parameters
all: Clears all ARP entries except authorized ARP entries.
dynamic: Clears all dynamic ARP entries.
static: Clears all static ARP entries.

H3C WA2600 series Specifications

General

Brand	H3C
Model	WA2600 series
Category	Wireless Access Point
Language	English