H3C WA2600 series - Display Dhcp Server Expired

5-9
<Sysname> display dhcp server conflict all
Address Discover time
4.4.4.1 Apr 25 2007 16:57:20
4.4.4.2 Apr 25 2007 17:00:10
--- total 2 entry ---
Table 5-1 display dhcp server conflict command output description
Field Description
Address Conflicted IP address
Discover Time Time when the conflict was discovered
display dhcp server expired
Syntax
display dhcp server expired { all | ip ip-address | pool [ pool-name ] }
View
Any view
Default Level
1: Monitor level
Parameters
all: Displays the lease expiration information of all DHCP address pools.
ip ip-address: Displays the lease expiration information of a specified IP address.
pool [ pool-name ]: Displays the lease expiration information of a specified address pool. The pool
name is a string of 1 to 35 characters. If the pool name is not specified, the lease expiration information
of all address pools is displayed.
Description
Use the display dhcp server expired command to display the lease expiration information of specified
DHCP address pool(s) or an IP address.
DHCP will assign these expired IP addresses to DHCP clients after all addresses have been assigned.
Examples
# Display information about lease expirations in all DHCP address pools.
<Sysname> display dhcp server expired all
IP address Client-identifier/ Lease expiration Type
Hardware address
4.4.4.6 3030-3066-2e65-3230- Apr 25 2007 17:10:47 Release
302e-3130-3234-2d45-
7468-6572-6e65-7430-
2f31
--- total 1 entry ---