H3C WA2600 series - Static-Bind Client-Identifier

5-24
View
User view
Default Level
2: System level
Parameters
None
Description
Use the reset dhcp server statistics command to clear the statistics of the DHCP server.
Related commands: display dhcp server statistics.
Examples
# Clear the statistics of the DHCP server.
<Sysname> reset dhcp server statistics
static-bind client-identifier
Syntax
static-bind client-identifier client-identifier
undo static-bind client-identifier
View
DHCP address pool view
Default Level
2: System level
Parameters
client-identifier: The client ID of a static binding, a string with 4 to 160 characters in the format of
H-H-H…, each H indicates 4 hex digits except the last H indicates 2 or 4 hex digits. For example,
aabb-cccc-dd is a valid ID, while aabb-c-dddd and aabb-cc-dddd are both invalid.
Description
Use the static-bind client-identifier command to specify the client ID of a static binding in a DHCP
address pool.
Use the undo static-bind client-identifier command to remove the client ID of a static binding from a
DHCP address pool.
By default, no client ID is specified.
Note that:
z Use the static-bind client-identifier command together with the static-bind ip-address
command to accomplish a static binding configuration.
z The ID of the static binding of a client must be identical to the ID displayed by using the display
dhcp client verbose command on the client. Otherwise, the client cannot obtain an IP address.
z If you use the static-bind client-identifier or static-bind mac-address command repeatedly, the
latest configuration will overwrite the previous one.
Related commands: dhcp server ip-pool, static-bind ip-address, static-bind mac-address, display
dhcp server tree, and display dhcp client verbose.