Removal of Rust Inhibitor
For ease of removal, first use a plastic scraper to remove most of the rust inhibitor and then use WD-40 or
another PH neutral degreaser to spray all the way covers and other non-painted surfaces that have been coated
with rust inhibitor. Let it soak for a few minutes before removing it. Then use shop towels to remove it. For thick
applications of rust inhibitor use a plastic scraper to remove it.
: HTTPS://VIMEO.COM/HAASAUTOMATION/REVIEW/171129636/7C2A5127F9
Important: Do not use scotch-brite or metal scrapers, these will scratch the way covers. Furthermore, to avoid
any contamination of the way cover seals with the sticky residue. Do not move any of the axes until all the rust
inhibitor has been removed.
To Next Page
Loading...
