Haas Bar Feeder User Manual

,
Haas Automation Inc.
2800 Sturgis Road
Oxnard, CA 93030-8933
U.S.A. | HaasCNC.com
To get translated versions of this Manual:
1. Go to www.HaasCNC.com
2. See Owner Resources (bottom of page)
3. Select Manuals and Documentation
© 2015 Haas Automation, Inc. All Rights Reserved. Copy by Permission Only. Copyright Strictly Enforced.
Haas Bar Feeder
Operator’s Manual Supplement
96-8913
Revision A
May 2015
English
Original Instructions
96-8913A.book Page i Monday, May 18, 2015 7:55 AM

Haas Bar Feeder Specifications

General

Manufacturer	Haas Automation, Inc.
Bar Change Time	Varies by model and setup
Interface	Haas CNC control
Load Capacity	Varies by model
Compatibility	Haas CNC Lathes
Control	Integrated with Haas CNC control

Summary

Chapter 1: Safety

1.1 Introduction

Overview of safety guidelines for using the Haas Bar Feeder and understanding hazards.

1.2 Read Before Operating

Critical safety instructions, warnings, and cautions that must be read before operating the machine.

1.3 Setup Safety

Key safety precautions to follow during the setup and adjustment of the Bar Feeder.

1.4 Operational Safety

Essential safety measures to ensure safe operation of the Bar Feeder during use.

Chapter 2: Introduction

2.1 Features

Chapter 3: Operation

3.1 Bar Feeder Setup

Comprehensive guide to setting up the Haas Bar Feeder for various applications.

3.1.1 Bar Feeder Positions

Description of the Feed/Auto and Lockout/Lathe Setup positions for the Bar Feeder.

3.1.2 Lathe Setup - Workholding

Guidelines for selecting and setting up appropriate lathe workholding for bar feeding.

3.1.3 Lathe Setup - Haas Spindle Liners

Information on choosing and installing Haas spindle liners for smooth bar feeding.

3.1.4 Bar Setup - Load Bars

Hexagonal Bar Stock

3.1.5 Bar Setup - Transfer Tray Adjustment

3.1.6 Bar Setup - Push Rod Installation / Removal

3.1.7 Bar Feed Variable Setup

Configuration of Bar Feeder variables for specific part lengths and allowances.

Push Rod Clearance for #3102

3.1.8 Reference Position Setup

Setting the reference position for accurate bar feeding operations.

3.1.9 Bar Setup - Charging Tray Angle Adjustment

3.2 Bar Length Reset Procedure

Chapter 4: G-Code Reference

4.1 G105 Servo Bar Command

Detailed explanation of the G105 command for controlling the Haas Bar Feeder.

4.2 G105 Q Modes

Description of available Q modes for G105, used for setup and troubleshooting.

Chapter 5: Programming

5.1 Program Examples

5.1.1 Example 1 - Cutoff Subprogram

5.1.2 Example 2 - Cutoff in Program

5.1.3 Example 3 - Double Push

5.2 Counter

5.3 Loading Short Bars

5.4 Macro Variables

Chapter 6: Maintenance

6.1 Maintenance

Routine maintenance procedures for optimal performance and longevity of the Bar Feeder.