Hach 5410001 - Electrical Installation; Remove the Access Cover

Figure 7 Sample flow through the conditioning kit
1 Sample flow 4 Bypass tee, unfiltered
sample
7 Unfiltered-sample ball valve
(shown open)
2 Bypass flow 5 Flow observation point 8 Low-flow valve option
3 Drainage flow 6 Filtered-sample bypass ball
valve (shown open)
9 High-flow valve option
3.3 Electrical installation
D A N G E R
Electrocution hazard. Always remove power to the instrument before making electrical
connections.
3.3.1 Remove the access cover
Remove the access cover to connect to the wiring terminals. Refer to Figure 8.
12
English