Hach 900 MAX - Setting up the Bottles; One-Bottle Sampling; Two- and Four-Bottle Sampling

Section 2
Page 27
8990hrd.fm Setting Up the Bottles
Figure 9 Bottle Configurations
2.5 Setting Up the Bottles
2.5.1 One-Bottle Sampling
For single bottle composite sampling, install the Full Bottle Shut-off (refer to
Section 2.7 on page 31) and place the bottle in the center of the refrigerator
(Figure 15 on page 31). The Full Bottle Shut-off positions the sample tubing
over the bottle mouth.
2.5.2 Two- and Four-bottle Sampling
For two-bottle sampling, install the distributor (refer to Section 2.6.1 on
page 30) and place the bottles in the Bottle #1 and Bottle #2 positions in the
tray as shown in Figure 10.