Hach CLF10sc - Page 6

Figure 2 Chlorine flow cell overview
1 Flow sensor 8 Sample out fitting
• English: Speed–fit fitting—3/8 in. OD tube
• Metric: Speed–fit fitting—10 mm OD tube
2 Plug, 1/8 in. NPTF 9 Chlorine sensor alignment mark
3 Float alignment mark 10 Valve, cleaning port, 1/4 in. OD tube
4 Plug, 1/2 in. NPTF 11 Flow cell inlet
• English: Speed–fit fitting—1/4 in. OD tube
• Metric: Speed–fit fitting—6 mm OD tube
5 Lock ring 12 Flow cell
6 Sealing hub 13 Flow control valve
7 O-ring 14 Float
6 English