118
Advanced Operations
Note: If the Backup was already stored before, the message "Data already
exists. Overwrite?" is displayed. Press OK to overwrite the data.
If the file was stored the message Instrument Backup is stored to
USB stick will be displayed.
4. Press OK to return to the System Checks menu.
Restore backup data:
Important Note: All current data will be overwritten when restoring
the Backup file!
1. Press Instrument Backup in the System Checks menu.
2. Connect the USB memory stick containing the Backup
(section 3.3 on page 14).
3. Press Restore to pass back the data.
To Next Page
Loading...
