Hach DRB 200 Instrument Manual

16
Instrument Use
2. Press the right arrow key to scroll through the menu. Select
the required language (see
Table 1).
3. The instrument is automatically initialized and is then ready
for operation.
2.1.2 Adjusting the Contrast
1. Hold down the middle key while switching on the
instrument.
2. Use the up and down arrow keys to adjust the contrast.
3. Press OK to accept the changes.
2.2 Routine Operation
1. Switch on the instrument.
2. Select the required temperature program using the
appropriate keys (see section
2.4 on page 17).
3. Prepare the test vials as described in the analysis procedure.
4. The instrument will be heated to the set temperature. Two
beeps indicate that the required temperature has been
reached.
Language
SPL
Language
ENL
Language
FI
Language
GB D
Table 1 Language Settings
Abbreviation Country
GB English
D Germany
F France
I Italy
E Spain
NL Netherlands
S Sweden
PL Poland
DK Denmark
COD TOC
Start Start
80°C TOC
Start
150°C TOC
Start Start
150°C TOC
87’ Start

Hach DRB 200 Specifications

General

Temperature Stability	±0.2 °C
Block Material	Aluminum
Display	Digital
Power Supply	100-240 V AC, 50/60 Hz
Block Capacity	16 mm diameter tubes
Number of Holes	Varies depending on block type (e.g., 40, 15)
Hole Diameter	16 mm
Temperature Range	37 - 165 °C (98.6 - 329 °F)