EasyManuals Logo

Hach DRB 200 Instrument Manual

Hach DRB 200
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
Please read this entire manual before unpacking, setting up, or
operating this instrument. Pay particular attention to all danger and
caution statements. Failure to do so could result in serious injury to
the operator or damage to the equipment.
To ensure the protection provided by this equipment is not
impaired, do not use or install this equipment in any manner
other than that which is specified in this manual.
Use of Hazard Information
If multiple hazards exist, this manual will use the signal word
(Danger, Caution, Note) corresponding to the greatest hazard.
DANGER
Indicates a potentially or imminently hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation that may result in
minor or moderate injury.
NOTE
Information that requires special emphasis.
Precautionary Labels
Read all labels and tags attached to the instrument. Personal
injury or damage to the instrument could occur if not observed.
This symbol, if noted on the instrument, references the
instruction manual for operational and/or safety
information.
Safety Precautions
Hot Surfaces. Touching the reactor block surfaces and vials
while hot can cause serious burns.
Protective Earth Ground. This product requires a protective
earth connection. If not provided with a plug on a cord,
connect positive earth to this terminal (U.S. cord set
provides ground).

Other manuals for Hach DRB 200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hach DRB 200 and is the answer not in the manual?

Hach DRB 200 Specifications

General IconGeneral
Temperature Stability±0.2 °C
Block MaterialAluminum
DisplayDigital
Power Supply100-240 V AC, 50/60 Hz
Block Capacity16 mm diameter tubes
Number of HolesVaries depending on block type (e.g., 40, 15)
Hole Diameter16 mm
Temperature Range37 - 165 °C (98.6 - 329 °F)

Related product manuals