6
Safety Precautions
Safety Equipment
Use protective clothing when operating the reactor, including
goggles or face mask, and gloves.
Reagent Spills
Clean up spilled reagents immediately. If reagent contacts skin,
rinse the affected area thoroughly with water. Avoid breathing
released vapors. Read the Material Safety Data Sheets (MSDS)
supplied with each reagent for complete chemical information.
Fire Hazard
Avoid the presence of flammable liquids near the operating
reactor. A fire hazard could be created.
Power Cord
A power cord suitable for 115 V ac line voltage is supplied with
the DRB
200.
DANGER:
Do not allow the power cord to pass under the instrument.
To Next Page
Loading...
