17
Installation
The dimensions of the standard frame for wall installation are shown in Figure 7.
3.2.2.1 Assemble the clamps on the frame and wall bracket
Install the clamps on the frame and wall mount bracket before installation on the wall.
Prerequisites
• Frame
• Wall mount bracket
• Clamps
• Hardware—wall bracket, spacer, nuts and bolts
Procedure
1. Position two clamp halves (one with threads and one without threads) around the wall
mount bracket as shown in Figure 8.
2. Connect the clamp halves together with four bolts. Lightly tighten the bolts to
temporarily hold the clamp in position.
Figure 7 Standard frame dimensions
1 22.8 in. with 2¼ in. spacer; 32.6 in. with 12 in. spacer
To Next Page
Loading...
