Figure 2 Product components
1 Pocket Pro tester or Pocket Pro+ tester 3 Lanyard
2 AAA alkaline batteries (4x) 4 SINGLET
™
(7.00 pH)
Install the batteries
C A U T I O N
Explosion hazard. Incorrect battery installation can cause the release of explosive gases.
Be sure that the batteries are of the same approved chemical type and are inserted in the
correct orientation. Do not mix new and used batteries.
W A R N I N G
Fire hazard. Battery substitution is not permitted. Use only alkaline batteries.
Install the four AAA alkaline batteries in the tester. Refer to the illustrated steps in
Figure 3.
Figure 3 Install the batteries
5
To Next Page
Loading...
