EasyManuals Logo

Hach SC4200c Basic User Manual

Hach SC4200c
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
Problem Possible cause Solution
The sensor status LED
stays off, but the second
sensor operates.
Sensor connection issue Examine the sensor and the sensor cable for
damage. If damage is found, contact technical
support.
If no damage is found, disconnect the sensor, wait
for 15 seconds, then connect the sensor again.
Contact technical support if the LED stays off again.
The sensor status LED
flashes amber, while the
second sensor is not
connected.
Sensor connection issue Examine the sensor and the sensor cable for
damage. If damage is found, contact technical
support.
If no damage is found, disconnect the sensor, wait
for 15 seconds, then connect the sensor again.
Contact technical support if the LED flashes amber
again.
Connection problems
Problem Possible cause Solution
The cloud connection LED
stays red.
No access to cloud,
but access to
internet
If the controller is connected first time to cloud, make sure
that the controller is provisioned by the MSM.
If the controller was connected to the cloud before, set the
controller to off. Set the controller to on again. Contact
technical support if the LED stays red again.
The cloud connection LED
stays off. Sometimes the
LED flashes blue for a short
time.
No access to internet Cellular internet access:
Use the web server application to check the SIM card
settings (provider, APN etc.).
Use the web server application to check the network
status.
Make sure that the prepaid SIM card has credit.
Make sure that the SIM card data volume is not
exceeded.
LAN internet access:
Make sure that the controller has approval to be
connected in the network.
Make sure that the network cable is connected to the
correct Ethernet port. Refer to Figure 6 on page 12.
Use the web server application to examine the network
status.
The cloud
connection LED is
not working.
Make sure that the sensors are connected to MSM.
Contact technical support.
Replacement parts and accessories
Refer to the expanded user manual on the manufacturer's website for the replacement parts and
accessories that are approved by the manufacturer.
22
English

Other manuals for Hach SC4200c

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hach SC4200c and is the answer not in the manual?

Hach SC4200c Specifications

General IconGeneral
BrandHach
ModelSC4200c
CategoryControl Unit
LanguageEnglish

Related product manuals