Hach sensION+ MM150 - Displaying Calibration Data

19
6. Operation
ENGLISH
6.8. Displaying calibration data
To view the data obtained after
calibration on screen.
Note:
- If the pH was calibrated at three
points, the data for the two slopes
obtained will be displayed.
- During conductivity calibration,
the instrument adjusts a constant
for each standard. Hence, a single
constant will be displayed if one-
point calibration was performed, 2
constants in the case of two-point
calibration and 3 constants for three-
point calibration.
(1)
Press and
to select the required option.
(2)
Press the keys simulta-
neously.
pH Conductivity (EC) REDOX (ORP)
Slope
Asymmetry potential
Sensitivity (%)
Calibration temperature
etc. etc.
(1)
(2)
(1)
(2)
(1)
(2)
Deviation
obtained
Calibration
temperature
Constant and
temperature
1st standard
sensION+ MM150 HACH 0710.indd ANG:19sensION+ MM150 HACH 0710.indd ANG:19 7/9/10 13:03:037/9/10 13:03:03