21
6. Operation
ENGLISH
6.12. Display backlighting
At the end of a measurement, whether in stability or continuous, the screen automatically lights up for 2
seconds.
The user can also light up the screen at any other time by pressing
, which will backlight the screen for 3
seconds.
Notes: Only the time of the manual
backlighting of the display can be
modified.
You cannot change the automatic
backlighting time (2 sec.) after
completing a measurement.
By increasing the display's
backlighting time, you reduce the
autonomy of the instrument (battery
life).
3 s 6 s
Immediately
inmediatamente
6.13. Shutting down the instrument
Follow the diagram below.
2 s
Changing backlighting time
Follow the diagram.
Continuous backlighting
In low-light environments, it
is advisable to work with the
screen lit.
Note: Backlighting the display
reduces the autonomy of the
instrument (battery life).
sensION+ MM150 HACH 0710.indd ANG:21sensION+ MM150 HACH 0710.indd ANG:21 7/9/10 13:03:047/9/10 13:03:04
To Next Page
Loading...
Need help?
General
