INTRODUCTION
Thank you for purchasing this drill press.
This machine has been designed for drilling large or small holes in metal, wood,plasc
etc.Before aempng to use this product, please read this manual thoroughly and
follow the instrucons carefully. In doing so you will ensure the safety of yourself and
that of others around you, and you can look forward to your purchase giving you long
and sasfactory service.
IMPORTANT
Please read all of the safety and operang instrucons carefully before using this
product. Please pay parcular aenon to all secons of these instrucons that
display warning symbols and noces.
WARNING: THIS SYMBOL IS USED THROUGHOUT THE
INSTRUCTIONS WHENEVER THERE IS A RISK OF PERSONAL INJURY.
ENSURE THAT THESE WARNINGS ARE READ AND UNDERSTOOD AT
ALL TIMES.
GENERAL SAFETY RULES
WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE
RISK OF FIRE, ELECTRIC SHOCK AND PERSONNAL INJURY
INCLUDING THE FOLLOWING. READ ALL THESE INSTRUCTIONS
BEFORE ATTEMPTING TO OPERATE THIS PRODUCT AND SAVE
THESE INSTRUCTIONS FOR FUTURE REFERENCE.
GENERAL SAFETY IN THE WORKPLACE
1. ALWAYS ensure that air can circulate around the machine and that the air
vents are unobstructed.
ALWAYS keep work area clean & dy. Cluered work areas and benches
invite accidents.
NEVER over-reach. Keep proper foong and balance at all mes.
NEVER store equipment in a wet/damp environment or expose to rain.
KEEP other persons away. Do not let persons, especially children, not
involved in the work, touch the tool or extension cable and keep them away
from the work area.
NEVER operate a machine when under the influence of alcohol, drugs or
medicaon.
2.
3.
4.
5.
6.
2
To Next Page
Loading...
