7. ALWAYS ensure the workplace is well lit. Ensure that lighng is placed so that
you will not be working in your own shadow.
Do not use tools in the presence of flammable liquids or gasses.
Stay alert, watch what you are doing, use common sense and do not operate
the tool when you are red.
8.
9.
CARE OF POWER TOOLS
1. Read this manual carefully.Learn the machine applications and limitations,as
well as the specific potenal hazards peculiar to it.
2. ALWAYS keep guards in place and in working order. A guard or other part that
is damaged should be properly repaired or replaced by an authorized service
centre, unless otherwise indicated in this instrucon manual.
3. Remove any adjusng keys or wrenches before starng. Form the habit of
checking to ensure that keys, wrenches and tools are removed from th
e
machine
.
4. Don’t force the machine and use the correct tool. It will do the job beer
and safer, at the rate for which it was intended.
5. ALWAYS disconnect the machine from the power supply before carrying out
any servicing or changing of accessories.
6. Before further use of the tool, it should be carefully checked to determine
that it will operate properly and perform its intended funcon. Check for
alignment of moving parts, binding of moving parts, breakage of parts,
mounng or other condion that may affect its operaon.
7. Have defecve switches repaired by an authorized service centre. Do not
use a tool if the switch does not turn it on and off.
8. ALWAYS check for any damage or any condion that could affect the
operaon of the machine. Damaged parts should be properly repaired.
9. NEVER remove the cover panel unless the machine is disconnected from
the
power
supply, and never use the machine with cover panels removed.
10. Have your tool repaired by a qualified person. This tool co
mplies with the
relevant safety rules. Repairs should only be carried out by qualified persons
using original spare parts, otherwise this may result in considerable danger
to the user.
11. NEVER use this product for any other purpose than that described in this
booklet.
12. NEVER abuse the power cable by yanking the cable to disconnect it from the
socket. Keep the cable away from heat, oil or sharp edges.
13. Guard against electric shock. Avoid body contact with earthed or grounded
surfaces.
14. If the tool should be used outdoors, use only extension cables intended for
outdoor use and marked accordingly.
15. Avoid accidental starng by making sure the power switch is off before
plugging in the power cable.
3
To Next Page
Loading...
