PROTECTIVE CLOTHING
1. Dress properly. Loose clothing or other jewellery may get caught in moving
parts. Non-slip footwear is recommended. Wear protecve hair covering to
contain long hair..
2. ALWAYS wear safety glasses. (Everyday glasses are not safety glasses.)
3. Wear a face mask if drilling into any material which produces dust.
ELECTRICAL CONNECTIONS
WARNING! Read these electrical safety instrucƟons thoroughly
before connecƟng the product to the mains supply.
Before switching the product on, make sure that the voltage of your electricity
supply is the same as that indicated on the rang plate. Connecng it to any
other power source may cause damage.
This product may be fied with a non-rewireable plug. If it is necessary to change
the fuse in the plug, the fuse cover must be refied. If the fuse cover becomes
lost or damaged, the plug must not be used unl a suitable replacement is
obtained.
If the plug has to
be changed because it is not suitable for your socket, or due to
damage, it should be cut off and a replacement fied,following the wiring
instrucons shown below.The old plug must be disposed of safely, as inseron
into a mains socket could cause an electrical hazard.
5
To Next Page
Loading...
