12
3.3.2 Finish cooking
Touching the heating zone selection control that you
wish to switch off.
Turn the cooking zone off by touching the slider to “ ”.
Make sure the display shows “0”.
Turn the whole cooktop off by touching the ON/OFF
control.
Beware of hot surfaces
H will show which cooking zone is hot to touch. It
will disappear when the surface has cooled down to
a safe temperature. It can also be used as an energy
saving function if you want to heat further pans, use
the hotplate that is still hot.
3.3.3 Using the Boost function
Activate the boost function
Touching the heating zone slider control
Touching the slider to the right end . Make sure the
display shows “P”.
Cancel the Boost function
Touching the heating zone slider control that you wish
to cancel the boost function.
Turn the cooking zone off by touching the slider to “ ”.
Make sure the display shows “0”.
ENGLISH
To Next Page
Loading...
Need help?
General
