EasyManuals Logo

Haier HAMTP64MC User Manual

Haier HAMTP64MC
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
14
French Plaque
To activate the French Plaque area, simply press the Flexible
Area control for 2 second
Move the position of the pot, the power will change automatically
Cancel French Plaque
Press the Flexible Area control to turn off the cooking zone.
3.3.6 Locking the Controls
You can lock the controls to prevent unintended use (for example children accidentally turning the
cooking zones on).
When the controls are locked, all the controls except the ON/OFF control are disabled.
To lock the controls
Touch and hold the Lock control for a while.
The timer indicator will show “ Lo ”
To unlock the controls
Touch and hold the Lock control for a while.
When the hob is in the lock mode, all the controls are disable except the ON/OFF , you can always
turn the induction hob off with the ON/OFF control in an emergency, but you shall unlock the hob first
in the next operation.
3.3.7 Pause Mode
You can pause the heating instead of shutting the hob off.
When entering the Pause mode, all the controls except the ON/OFF control are disabled.
To enter pause mode
Short touch the Pause control
All the indicator will show “ 11
To exit pause mode
Short touch Pause control.
When the hob is in the pause mode, all the controls are disable except the ON/OFF , you can always
turn the induction hob off with the ON/OFF control in an emergency. The hob will shut down after
10min if you don’t exit the pause mode.
3.3.8 Power Management Function
it is possible to set a maximum power absorption level for the induction hob, choosing up to
different power ranges.
induction hobs are able to limit themselves automatically in order to work at lower power level, to
avoid the risk of overloading.
ENGLISH

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Haier HAMTP64MC and is the answer not in the manual?

Haier HAMTP64MC Specifications

General IconGeneral
Hob typeZone induction hob
Hob coverNo
Knobs colorNickel
Product colorBlack
Hob width size59 cm
Top surface typeGlass-ceramic
Appliance placementBuilt-in
Cooking zone 1 typeRegular
Cooking zone 3 typeLarge
Cooking zone 4 typeSimmer
Cooking zone 1 boost3200 W
Cooking zone 1 power2000 W
Cooking zone 1 shapeRectangular
Cooking zone 3 power2200 W
Cooking zone 4 power1400 W
Cooking zone 1 positionLeft front
Cooking zone 2 positionLeft rear
Cooking zone 3 positionRight rear
Cooking zone 4 positionRight front
Number of cooking zones6 zone(s)
Cooking zone 1 power sourceElectric
Cooking zone 5 power sourceGas
Number of gas cooking zones0 zone(s)
Number of simultaneously used cooking zones6
Package depth690 mm
Package width645 mm
Package height115 mm
Package weight13000 g
Timer typeDigital
Control typeTouch
Built-in displayYes
Control positionTop front
AC input voltage220 - 240 V
Connected load (electric)- W
Number of boosters4
Weight and Dimensions IconWeight and Dimensions
Depth520 mm
Width590 mm
Height58 mm
Weight12000 g
Installation compartment depth490 mm
Installation compartment width560 mm
Installation compartment height54 mm
Installation compartment dimensions (WxDxH)560 x 490 x 54 mm

Related product manuals