To enter Power Management Function
Turn on the hob, then Press at the same time
the Pause control and Lock control.
The timer indicator will show “ P5“ which means
To switch to another level
press +/- of the timer
or
There are 5 power levels, from “P1” to “p5”. The
timer indicator will show one of them.
Confirmation and Exit Power Management Function
Press at the same time Pause control and Lock
control for confirmation.
Then the hob will be turned off.
3.3.9 Timer control
You can use the timer in two different ways:
You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when
the set time is up.
You can set it to turn one or more cooking zones off after the set time is up.
The timer of maximum is 99min.
power level 5。The default mode is on 7.2kW。
“P1” : the maximum power is 2.5kW.
“P3” : the maximum power is 4.5kW.
“P5” : the maximum power is 7.2kW.
“P2” : the maximum power is 3.5kW.
“P4” : the maximum power is 5.5kW.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
