Haier HD90-A636-E User Manual

Haier HD90-A636-E

340 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

GB

User manual

Heat-Pump-Dryer

HD90-A636-E

Table of Contents

Questions and Answers:

J
John LoweAug 14, 2025
Why my Haier Dryer is not working?
- J
  Joseph HillAug 15, 2025
  If your Haier Dryer isn't starting, here are a few things to check: * Ensure the program has actually been started. * If the delay function is on, cancel it. * Make sure the door is fully closed. * Verify the machine is switched on. * Press the "Start/Pause" button. * Confirm the appliance is properly connected to the power supply. * Empty the water tank and reinstall it correctly, then press the "Start/Pause" button. * Deactivate the child lock, if it's enabled.
W
wrightmelissaAug 18, 2025
What to do if the door of my Haier HD90-A636-E doesn't close?
- X
  xperezAug 18, 2025
  If the door of your Haier Dryer won't close, make sure that no laundry is caught between the door and the gasket. Insert the laundry correctly.
G
gwilliamsonAug 21, 2025
How to improve drying results in my Haier HD90-A636-E Dryer?
- T
  Tyler GonzalesAug 21, 2025
  If your Haier Dryer isn't drying clothes properly, consider these possibilities: * The program setting might be incorrect, so double-check it. * Verify that you've chosen the correct dryness level. * A dirty lint filter, condenser filter, or clogged heat exchanger can impact drying, so clean them. * Also, ensure the ventilation slots are clear. * Overloading the dryer can also lead to poor results, so reduce the load size. * If there's a coating on the drum's inner surface, clean it with a vinegar-soaked cloth. * Ensure laundry is properly spun before drying, as overly wet items take longer. * Clean the moisture sensor inside the drum with a vinegar-soaked cloth. * Remember that warm laundry can feel more moist than it is, so spread it out to allow heat to escape.
J
jamesconnerAug 25, 2025
Why does my Haier HD90-A636-E Dryer take so long to dry?
- N
  njamesAug 25, 2025
  If your Haier Dryer is taking too long, here's what you can check: * A dirty condenser filter can extend drying time, so clean it. * Overloading the dryer can also increase drying time, so reduce the load. * Make sure your laundry is properly spun before drying. * Low ambient temperature can affect drying time; refer to the installation instructions and try to increase the ambient temperature if possible.
S
Shawn JonesAug 28, 2025
Why is the drying time too short on my Haier HD90-A636-E Dryer?
- R
  Randy DavisAug 28, 2025
  If your Haier Dryer cycle is too short: * For single items or very small loads, use the TIMER program. * If the laundry is already too dry, select the TIMER program or a higher dryness level.
J
johnsonrobertAug 31, 2025
What to do if my Haier HD90-A636-E doesn't work and shows ??? on the display?
- T
  Tiffany BrownAug 31, 2025
  If your Haier Dryer isn't working and the display shows ???, it could be due to a couple of reasons: * The laundry might have reached the dryness level set by the program; in this case, check the program setting and consider post-drying if needed. * Alternatively, the drum might be empty; check to ensure there's laundry inside.
S
Sandra BradfordSep 3, 2025
How to prevent creasing in my Haier HD90-A636-E Dryer?
- W
  Wayne LuceroSep 4, 2025
  If your laundry is creased after using the Haier Dryer: * Avoid overloading the dryer by reducing the amount of laundry. * Ensure you've selected the appropriate program for the fabric type.
A
Angela KrauseSep 6, 2025
Why is the drum light not working in my Haier Dryer?
- B
  Beth GilbertSep 7, 2025
  If the drum light in your Haier Dryer isn't working: * Check that the appliance is properly connected to the power supply. * Make sure the machine is switched on. * If the bulb is functional, contact customer service to replace the lamp.
J
Jaime ChavezSep 12, 2025
Why does the remaining time stop on my Haier HD90-A636-E Dryer display?
- B
  byoungSep 12, 2025
  If the remaining time on your Haier Dryer display stops or skips, this is a normal operation. The remaining time adjusts automatically based on: * The type of laundry. * The amount loaded. * The moisture level of the laundry. * The ambient temperature.

Haier HD90-A636-E Specifications

General

Dryer Type	Heat Pump
Capacity	9 kg
Energy Efficiency Class	A++
Programs	16
Control Type	Electronic
Drum Material	Stainless Steel
Display Type	LED
Energy Rating	A++

Summary

Safety Information

Intended Use

Environmentally Responsible Use

Tips for efficient and eco-friendly operation of the dryer, including spin speed and load size.

Product Description

Included Accessories

Lists and shows the accessories provided with the appliance, such as drain hose and warranty card.

Control Panel Functions

Indicator Lights

Explains the meaning of maintenance and child lock indicators on the control panel.

Display and Programme Selection

Details display functions and how to select a drying programme using the rotary knob.

Operating Buttons

Explains the function of key buttons like On/Off, Temperature, and Dry Level.

Drying Programmes

Consumption Data

Operating Tips and Advice

Daily Use and Operation

Preparation Steps

Steps for preparing the appliance and laundry before starting a cycle.

Loading and Removing Laundry

Guidelines for loading, removing, and adding laundry during operation.

Starting and Interrupting Programmes

How to start, interrupt, change, or cancel a programme.

After Drying Procedures

Steps to take after the drying cycle finishes, including switching off and cleaning.

Care and Cleaning Procedures

Water Tank and Filter Maintenance

Instructions for emptying the water tank and cleaning lint/condenser filters.

Machine and Drum Cleaning

Maintenance of the machine exterior, heat exchanger, and interior drum.

Troubleshooting Guide

Information and Error Codes

Explains information codes and solutions for display error codes.

Troubleshooting without Codes

Solutions for common problems that do not display error codes.

Appliance Installation Guide

Preparation, Placement, and Electrical Connection

Steps for unpacking, positioning, and connecting the appliance.

Optional Accessories

Drain Hose and Stacking

Details on connecting the drain hose and stacking the appliance.

Technical Specifications

Customer Service and Support

Related product manuals

Preview: Haier HD90-A636

Haier HD90-A636

Preview: Haier HD90-A2979

Haier HD90-A2979

Haier HD90-A3979

Haier HD90-A2939

Preview: Haier HD90-A3Q979U1

Haier HD90-A3Q979U1

Haier HD90-A3Q979SU1

Haier I-Pro HD90-A3959

Preview: Haier HDV70E1

Preview: Haier HD80-01

Preview: Haier HD70-A82