EN
6-Daily use
17
6.6 Adding detergent
1. Slide out the detergent drawer.
2. Put the required chemicals into corresponding
compartments (Fig. 6-4).
3. Push back the drawer gently.
Note:
▶ Remove detergent residues before next wash cycle from the detergent drawer.
▶ Do not overuse detergent or softener.
▶ Please follow the instruction on the detergent package.
▶ Always fi ll the detergent just before the beginning of the wash cycle.
▶ Concentrated liquid detergent should be diluted before adding.
▶ Do not use liquid detergent if function “Delay“ is selected.
▶ Carefully choose the programme settings according to the care symbols on all laun-
dry labels and according to the programme table.
6-4
6-5
6-7
6-6
Stain removal
Delay
Anti-crease
Extra R inse
Speed
Temp.
Stain removal
Delay
Anti-crease
Extra R inse
Speed
Temp.
Re fres h
Spin
Smart
Shirt
Synthetic s
Quic k 15 ’
Re mote
Ba byca re
Cotton
Ec o 40-60Cotton 2 0
Delic ate
Wool
Allergy c are
6.7 Switch on the appliance
Touch the “Power“ button to switch on the appliance
(Fig. 6-5). The LED of the “Start/Pause“ button is
fl ashing.
6.8 Select a programme
To get the best washing results, select a programme
which fi ts the degree of soiling and sort of laundry
type.
Turn the programme knob (Fig. 6-6) to select the
right programme. Related programme LED lights up
and the default settings are displayed.
6.9 Add individual selections
Select required options and settings (Fig. 6-7); refer to
Control Panel.
Note: Odour removal
Before fi rst use we recommended to run programme “COTTON + 90°C + 600rpm”
with no load and small amount of detergent in washing agent compartment (2) or special
machine cleaner to remove possible corruptive residues.
To Next Page
Loading...
Need help?
General