What to do if my Haier Washer fails to operate?
If your Haier Washer fails to operate, several factors could be at play. First, ensure that you've started the programme correctly and that the door is securely closed. Then, verify that the machine is switched on and that there is no power failure. Finally, check if the child lock is activated and deactivate it if necessary.
Why is my Haier HW120-B14979 vibrating so much while spinning?
If your Haier Washer is experiencing strong vibrations while spinning, make sure to remove all transportation bolts. Also, ensure the appliance is on solid, level ground and that the machine load is properly balanced.
How to fix drainage failure in Haier HW120-B14979 Washer?
To resolve drainage failure in your Haier Washer, first, check the drain hose for any blockages and clear them. Also, make sure that the drain hose end isn't higher than 100 cm above the floor.
Why is my Haier Washer not filling with water?
If your Haier Washer isn't filling with water, start by checking the water tap to ensure it's open. Inspect the inlet hose for any kinks that might be blocking the water flow. Also, check the water pressure to make sure it's sufficient. Ensure that the door is properly closed and that there is an adequate water supply.
What does error code 'E4' mean on my Haier Washer?
If your Haier Washer displays 'E4', it means the water level was not reached after 12 minutes or the drain hose is self-syphoning. Make sure that the tap is fully opened and the water pressure is normal. Also, check the drain hose installation.
What does CLR FLTR mean on my Haier HW120-B14979?
If your Haier Washer is displaying 'CLR FLTR', it indicates a drainage error where water isn't fully drained within 6 minutes. Check the drain hose installation.
Why does my Haier HW120-B14979 Washer leave powder on clothes?
If your Haier Washer leaves washing powder residues on the laundry, it may be due to insoluble particles of detergent. Try performing an extra rinse, brushing the points from the dry laundry, or choosing another detergent.
What does error code 'E2' mean on my Haier HW120-B14979 Washer?
If your Haier Washer displays 'E2', it indicates a lock error. Ensure that you shut the door properly.
Why is my Haier HW120-B14979 spinning failing?
Spinning may fail in your Haier Washer because of an unbalance of laundry. Check the machine load and laundry, then run a spinning programme again.
What causes a strange sound in Haier HW120-B14979?
A strange sound in your Haier Washer could be due to the appliance not being on solid ground or not being levelled. Ensure solid ground and a levelled position. Also, ensure pockets are emptied of keys, coins etc.
General| Door color | Black |
|---|---|
| Door hinge | Left |
| Control type | Rotary, Touch |
| Display type | LED |
| Loading type | Front-load |
| Drum material | Stainless steel |
| Product color | White |
| Built-in display | Yes |
| Custom panel-ready | - |
| Appliance placement | Freestanding |
| Drum capacity | 12 kg |
| Cycle time (max) | 238 min |
| Delay start (max) | 24 h |
| Spin-drying class | B |
| Maximum spin speed | 1400 RPM |
| Noise level (spin) | 69 dB |
| Noise level (wash) | 54 dB |
| Number of washing programs | 14 |
| Cycle time (quick washing program) | 15 min |
| AC input voltage | 220 - 240 V |
| Energy efficiency scale | A to G |
| Water consumption per cycle | 56 L |
| Energy consumption washing per cycle | - kWh |
| Package depth | 714 mm |
| Package width | 653 mm |
| Package height | 890 mm |
| Package weight | 86000 g |
Weight and Dimensions| Width | 600 mm |
|---|---|
| Height | 850 mm |
| Weight | 80000 g |
| Door diameter | 320 mm |
To Next Page
