Hakko Electronics 907-ESD User Manual

SOLDERING STATION
Instruction Manual
Thank you for purchasing the HAKKO 936 Soldering Station.
Please read this manual before operating the HAKKO 936.
Store the manual in a safe, easily accessible place for future reference.
Packing List/Specifications ……………………1
Precautions………………………………………2
Names of Parts …………………………………3
Setting up & Operating the HAKKO 936……3 4
Tip Care and Use
Maintenance
Calibrating the Iron Temperature…………5
Tips ………………………………………………6
Troubleshooting Guide…………………………7
Checking for breakage of the
heating element and cord assembly……8 9
Parts List
Station / Iron Holder………………………10
Iron…………………………………………11
Wiring Diagram…………………………………11
Table of Contents
®

Hakko Electronics 907-ESD Specifications

General

Type	Soldering Iron
ESD Safe	Yes
Tip to Ground Potential	< 2 mV
Heating Element	Ceramic
Voltage	24V
Cord Length	1.2 m
Temperature Range	200°C - 480°C
Tip Compatibility	T18 Series
Tip to Ground Resistance	<2Ω
Compatible Stations	FM-202, FM-203, FM-206