Need help?Do you have a question about the Hakko Electronics FX-888 and is the answer not in the manual?
General| Power Consumption | 70 W |
|---|---|
| Heating Element | Ceramic |
| Tip Type | Replaceable |
| Output Voltage | 24V |
| Tip Temperature Recovery | Fast |
| Tip Compatibility | T18 series tips |
| Warranty | 1 year |
| Power Supply | AC 120V, 60Hz |
Critical safety warnings about high temperatures and user capabilities.
Precautions for safe operation to avoid injury or damage.
Guidelines to prevent damage and ensure safe use of the soldering station.
Instructions for setting up and using the iron holder with sponges.
How to turn on the power and indicators for temperature readiness.
Procedures for safely finishing soldering work.
Procedure to test the heating element and sensor resistance.
Methods to test the cord assembly for continuity and breaks.
Troubleshooting steps when the unit does not turn on or heat up.
Diagnosing issues when the heater lamp is on but the tip does not heat.
Addressing problems where solder does not wet the tip properly.
Troubleshooting low tip temperature or inability to hold desired temperature.
To Next Page