Hakko Electronics FR-810B User Manual

1. PACKING LIST AND PART NAMES
Please check to make sure that all items
listed below are included in the package.
SMD Rework Station
Instruction Manual
Thank you for purchasing the HAKKO FR-810B SMD Rework Station.
This unit features digital control and display of hot air temperature.
Please read this manual before operating the HAKKO FR-810B.
Keep this manual readily accessible for reference.
①
Pad
The pad absorbs parts.
Nozzle
(notincluded)
③Sensor (internal)
This sensor detects the
temperature of the hot air.
②Vacuum pipe
The pad is mounted on the
tip of the vacuum pipe.
④Vacuumpipecontrolknob
Thisknobcontrolsthelength
ofthevacuumpipe.
⑤Pick-upindicator
The movement of the vacuum pipe can be checked here.
S(START/STOP)
button
V(VACUUM)
button
● Handpiece
Power cord
HAKKO FR-810B
station
Handpiece
Handpiece holder
handpiece holder
attachment plate
Tapping
screw
HAKKO FR-810B station
Handpiece holder
Pads (ø3 mm (0.12 in.), ø5 mm (0.20 in.), ø7.6 mm (0.3 in.))
Heat resistant pad
Power cord
Vacuum pipe control knob (L) (with tapping screw)
Instruction manual
Temperature distribution chart
1
1
2 each
1
1
1
1
1
Air indicator Temp/Time indicator
Heat resistant pad
Vacuum pipe
control knob (L)
2 for each pad

Hakko Electronics FR-810B Specifications

General

Brand	Hakko Electronics
Model	FR-810B
Category	Soldering Gun
Language	English

Summary

1. PACKING LIST AND PART NAMES

2. SPECIFICATIONS

Handpiece Specifications

Detailed specifications for the HAKKO FR-810B handpiece.

Station Specifications

Detailed specifications for the HAKKO FR-810B station unit.

3. WARNINGS, CAUTIONS AND NOTES

4. INITIAL SETUP

Station Assembly

Instructions for attaching the handpiece holder to the main station unit.

Handpiece Setup and Vacuum Function

Guidance on attaching nozzles and using the vacuum function with the handpiece.

Using Specific Nozzles

Attaching Old Nozzles

5. OPERATION

Air Blow Operation

How to start and stop the hot air blowing function.

Setting Airflow

Adjusting the air flow rate from 1 to 9.

Setting Temperature and Timer

Vacuum Function Operation

Timer Function Modes

Preset Mode Operation

Password Setting for Restrictions

Offset Mode Settings

Other Main Functions

Chain Presets Function

Utilizing sequential presets for multi-step rework processes.

Auto Sleep Function

How the automatic sleep function conserves power when idle.

Auto Shutoff and Cooling Bypass

Checking Operational Settings

6. PARAMETER SETTING

7. TEMPERATURE DISTRIBUTION CHART

8. MAINTENANCE / INSPECTION

Removing the Heating Element

Step-by-step guide to safely remove the heating element.

Measuring Resistance Values

How to measure resistance to check heater and sensor integrity.

9. ERROR MESSAGE

10. TROUBLE SHOOTING GUIDE

11. PARTS LIST

12. OPTIONAL PARTS (Nozzle)

Accessories

Combining with Other Products

How to integrate the FR-810B with accessories like grip fixtures and preheaters.

13. OPTIONAL PARTS (Accessories)