Hakko Electronics 936 - Packing List; Specifications; Station; Soldering Iron

HAKKO 936 Station …………………………………1
Soldering Iron (HAKKO 900 (S), 907 or 908) ……1
HAKKO Iron Holder (With Cleaning Sponge) ……1
Hex Wrench (1.5 mm,0.059 in.)……………………1
Instruction Manual …………………………………1
Packing List
Please check the contents of the HAKKO 936 package and confirm that all the items listed below are included.
936 Station / 936 Station ESD
Output Voltage 24V AC
Temperature Range 200 C~480 C/392 F~896 F
Dimensions 120(W)x93(H)x70(D)mm
4.7(W)x3.7(H)x6.7(D)in.
Weight (W/O Cord) 1, 300g (2.9 lbs.)
Specifications
Name HAKKO 936
Power Consumption 100,110,220-240V / 60W
Station
900S 907 908
900S-ESD 907-ESD 908-ESD
Power Consumption 24V AC-50W
Tip to Ground Resistance Under 2
Tip to Ground Potential Under 2mV (TYP. 0.6mV)
Heating Element Ceramic heater
Cord Assembly 1.2m (4 ft.)
Total Length (w/o Cord) 176mm 190mm 200mm
(7 in.) (7.5 in.) (7.9 in.)
Weight (w/o Cord) 25g 44g 54g
(0.06 lbs.) (0.09 lbs.) (0.12 lbs.)
Soldering Iron
The tip temperature was measured using HAKKO 191 thermometer.
Specifications and design subject to change without notice.
1
Station
Hex Wrench
Cleaning Sponge
Iron Holder
Iron/907,908
120V / 65W
Iron/900 (S)