Hakko Electronics FR-702 - Page 29

28
● ShutOff Set
1.
Move the cursor to select “ ShutOff Set ”.
After selecting, press <ENT>.
Select whether you will activate the auto shut off function. When the auto shutoff
function is set to on and no operation is performed for constant time after the iron is
set in the iron holder, the buzzer sounds three times and the auto shutoff function
will be enabled.
2. ON and OFF will be switched alternately
if you press the <↑> or <↓> button.
3. Selecting “ON” allows you to make the
setting for “Timer.”
(Default is 30 minutes.)
<↑> <↓> <ENT>
T emp M o d e
S h u t O f f S e t
V acuum M o d e
ﾟ C
OFF
NOR
<↑> <↓> <ENT>
S h u t O f f S e t
S h u t O f f
T i me r
OFF
30m
Select
“OFF”
Select
“ON”
4. When setting “Shut Off” to “ON,”
the area for “Timer” flashes.
5.Press the <↑> or <↓> to set the desired
figure.
6. Pressing the <ENT> button after this change
makes the set time stored in the internal memory.
<↑> <↓> <ENT>
S h u t O f f S e t
S h u t O f f
T i me r
ON
0m
<↑> <↓> <ENT>
T emp M o d e
S h u t O f f S e t
V acuum M o d e
ﾟ C
OFF
NOR