EasyManua.ls Logo

Hakko Electronics FR-702 - WARNINGS, CAUTIONS AND NOTES

Hakko Electronics FR-702
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
3. WARNINGS, CAUTIONS AND NOTES
WARNING
When power is ON, the tip and nozzle will be hot. To avoid injury or damage to
personnel and items in the work area, observe the following:
Donottouchthetipandnozzleorthemetalpartsnearthetipandnozzle.Donotdirect
thehotairtowardpersonnelortouchthemetalpartsnearthenozzle.
Donotallowthetipandnozzletocomecloseto,ortouch,flammablematerials.
Informothersintheareathattheunitishotandshouldnotbetouched.
Turnthepoweroffwhennotinuse,orleftunattended.
TurnthepoweroffwhenchangingpartsorstoringtheHAKKOFR-702.
Thisunitisforcounterorworkbenchuseonly.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision.
To prevent accidents or damage to the HAKKO FR-702, be sure to observe the following:
Do not use the unit for applications other than soldering or desoldering.
Do not strike the handpiece against hard objects to remove excess solder. This will
damage the handpiece.
Do not modify the HAKKO FR-702.
Use only genuine HAKKO replacement parts.
Do not allow the HAKKO FR-702 to become wet, or use it when hands are wet.
Be sure to hold the plug when inserting or removing the handpiece and power cords.
Be sure the work area is well ventilated. Soldering and desoldering produces smoke.
While using the HAKKO FR-702, don't do anything which may cause bodily harm
or physical damage.
Warnings, cautions and notes are placed at critical points in this manual to direct the
operator’s attention to significant items. They are defined as follows:
WARNING:FailuretocomplywithaWARNINGmayresultinseriousinjuryordeath.
CAUTION:FailuretocomplywithaCAUTIONmayresultininjurytotheoperator,
ordamagetotheitemsinvolved.

NOTE:ANOTEindicatesaprocedureorpointthatisimportanttotheprocess
beingdescribed.

Related product manuals