Model No. Unit Color Iron Holder Color Packing list
No.FX888
Blue-Yellow Blue-Yellow
Soldering station (FX-888D), Soldering
iron (FX-8801 with soldering tip type B),
Iron holder (with cleaning wire, cleaning
sponge), Instruction Manual
*Rubber cleaner sold separately.
Reliable digital technology by HAKKO – Introducing the HAKKO FX-888D
Excellent thermal recovery
•
Heater output has been increased by 30% compared to that of the conventional models
HAKKO 936・937. Also FX-888D delivers excellent thermal recovery by using T18
series tips for their terrific heat conductivity.
This allows soldering at a lower set temperature and reducing the thermal impact on
components as well as tip oxidation that can shorten tip life.
•
Thermal recovery graph
Rise time to 350°C is 20 seconds faster and tip temperature drop is reduced during
continuous work.
•
HAKKO FX-888D performance comparison graph with conventional stations
Able to shorten the time required for the same work and improve work efficiency
significantly.
To Next Page
Loading...
