Need help?Do you have a question about the Haldex EB Plus and is the answer not in the manual?
Defines the core principles of the EB+ system, including ABS and ELS.
Explains the modular construction, ECU, EPRVs, and pressure transducers.
Details system variants for semi and full trailers, and component integration.
Explains power sources via ISO 7638 and ISO 1185 connections.
Covers communication protocols, connectors, and data bus usage for diagnostics.
Lists information, distance, and change parameters available via the Info Centre.
Explains the function and dependency of the warning device on ISO 7638 power.
Outlines the sequence for verifying system integrity upon power-up.
Details system behavior when ignition is switched on, with and without air pressure.
Lists codes for sensor/wiring faults, intermittent low output, and low output.
Details codes related to brake apply solenoid circuits and their states.
Lists codes for hold and dump solenoid faults in EPRV assemblies.
Identifies auxiliary connectors and sensor connections on the ECU.
Details power, diagnostic, and interface connectors for the EB+ system.
Provides correct values for sensor output and resistance measurements.
Details earth continuity checks and solenoid resistance for COLAS®/ILAS®-E.
Lists part numbers for various ECU variants and their configurations.
Provides part numbers for different EPRV assembly configurations.
Advises on proper braking technique with the EB+ system to maintain control.
Explains the function of the LWS for monitoring brake lining wear.
Describes the Trailer Roll Stability function and its safety benefits.
Details the ILAS®-E system for traction assist and front axle lift.
General| Functionality | Diagnostics |
|---|---|
| Interface | USB |
| Operating System | Windows |
| Software Updates | Yes, via internet |
| Languages | English, Spanish, and French |
| Compatibility | Compatible with Haldex braking systems |
To Next Page
