Halo IOT Smart Sensor - Event Management; Event Creation and Adjustment; Advanced Formula Conditions

ADMINISTRATOR MANUAL
24
PAGE
CLICK
HERE
Events
The “Events” page is where
event signatures are added,
remove, and adjusted.
Signatures are created from
individual or multiple data
sources, thresholds, timing, and
machine learning algorithms.
From the "Events" page data
sources can be added and
removed and “Thresholds” can
be adjusted. The “Unique ID”
must not contain special
characters or spaces. Locations
with more than one HALO Smart
Sensor should use the same
“Unique ID’s” for the same event
in each HALO. Click "Save
Changes" to apply.
The "Advanced" column button is filled in
blue if advanced formula conditions exist
with that particular signature.
Clicking on the individual "Advanced"
buttons will open a box that advanced
formulas reside in. These can be edited
and allow for filtering and combining values
numerically and logically. "Click "Save
Changes" to apply.
Adding a new data source is done by
completing the "Unique ID", selecting a
data source from the drop down, setting a
"Threshold" and clicking the "+" button.
"Click "Save Changes" to apply.
V2.2 - 9/09/2020