Halo IOT Smart Sensor - Bacnet Protocol Implementation Conformance (PIC) Statement

ADMINISTRATOR MANUAL
20
PAGE
BACnet Protocol Implementation Conformance (PIC) Statement
ANNEX A - PROTOCOL IMPLEMENTATION CONFORMANCE STATEMENT (NORMATIVE)
(This annex is part of this Standard and is required for its use.)
BACnet Protocol Implementation Conformance Statement
Date: June 18, 2020
Vendor Name: IPVideo Corp
Product Name: Halo IOT Smart Sensor
Product Model Number: 2
Application Software Version: 2.7.13
Firmware Revision: 2.2.0
BACnet Protocol Revision: 14
Product Description:
HALO Smart Sensor is an IoT device that detects environmental changes that occur in privacy concern areas
where surveillance cameras can’t be installed. HALO Smart Sensor is capable of detecting vape, smoke, THC
and shouting in areas a camera cannot be placed. Additional sensors give HALO the ability to monitor air
quality for temperature, humidity, hazardous chemicals and more. When the sensor values exceed normal
levels, HALO Smart Sensor can send alerts to security personnel
BACnet Standardized Device Profile (Annex L):
 BACnet Operator Workstation (B-OWS)
 BACnet Advanced Operator Workstation (B-AWS)
 BACnet Operator Display (B-OD)
 BACnet Building Controller (B-BC)
 BACnet Advanced Application Controller (B-AAC)
 BACnet Application Specific Controller (B-ASC)
 BACnet Smart Sensor (B-SS)
 BACnet Smart Actuator (B-SA)
List all BACnet Interoperability Building Blocks Supported (Annex K):
DS-RP-B Data Sharing – Read Property B
DS-RPM-B Data Sharing – Read Property Multiple-B
DM-DDB-B Device Management – Dynamic Device Binding B
DM-DOB-B Device Management – Dynamic Object Binding B
DM-DCC-B Device Management – Device Communication Control B
V2.2 - 9/09/2020