Hammond X-5 - Page 101

Step
Test
&
Test
Point
Depress Tab. or
Extend
Tone bar
Play Keys
Adjust
Oscilloscope
or
Other Ind
Fig.
12
(a)
Leslie
Socket; Leslie ON/OFF
Note: That Pin 6 is grounded
(to Pin
1
1 and that
9
Pin
7,
Pon
6, & 1
to "ON"
Pin
7 is removed from ground (Pin
1)
Leslie Slow/Fast If
Tab.
is returned
o Slow, Pin
7 will be grounded.
to "Fast" Pin
6 and Pin 7 are removed from
ground (Pin 11.
Leslie
ON/OFF
to
"OFF"
13 (a) Ear
Ensemble
Tab. Note: Same Tone s ; Tone Bar
Setting
to "ON"
Lower
Man. Tone/
Bar
sets to:
8666444
Siring
Tab. to Same Tone
as Tone Bar Setting.
"ON"
Upper Man.
Tone/
Bar sets
to:
008888666
Full Tibias
Tab.
-
ditto
-
to "ON"
—
do
—
,
sets
806808006
Theater
Brass Tab.
-
ditto
-
to "ON"
-
do
-, sets
848868666
14 Test of
Mechanism Operation
a) Confirm that
Tone Bars are easy
to operate, and that one
Tone Bar doesn't disturb other
Tone Bar
operation,
and that Mark
8
is visible,
h) Confirm that
Keyboards are operational.
c] Confirm that Expression Pedal
is normal to operate
and to stop
at
will.
d| Confirm that position of
Knob Mark is normal.
e)
Confirm that
Pedal
Keys are normal
to
operate.
f) Confirm that
Tab.s are normal to operate.
15 Assembly
a) Confirm that Cabinet
can be put on the Leg.
b)
Confirm that Pedal
Unit can
be smoothly inserted.
c)
Confirm that
Knob Bolts can be set normally.