Hammond X-5 - Mechanism Operation Verification

Step Test & Test
Point
Depress Tab. or
Extend Tone Bar
Play Keys Adjust
Oscilloscope
or
Other
Ind
Fig.
12(a)
12
M
13
la}
Other Operation
Leslie Socket;
Pin
7,
Pon
6, & 1
Leslie
ON/OFF
to "ON"
Leslie Slow/Fast
to
"Fast"
Leslie ON/OFF
to "OFF"
Ensemble
Tab.
to "ON"
Lower
Man. Tone/
Bar sets to:
8666444
String Tab.
to
"ON"
Upper Man. Tone/
Bar sets to:
008888666
Full Tibias Tab.
to "ON"
806808006
Theater Brass
Tab.
to
"ON"
—
do
—
, sets
848868666
Note: That Pin
6
is
Pin 7 is removed fr
If
Tab.
is returned
Pin 6 and Pin 7 are
Note : Same Tone
a
Same Tone a
grounded (to Pin
Dm ground
(Pin
1)
o Slow,
Pin
7
will
removed from gro
s
Tone Bar Settinc
sTone Bar Setting
)
and that
je grounded,
nd (Pin 1>.
9
-
ditto
-
-
ditto
-
14 Test of Mechanism Operation
a)
Confirm that Tone Bars are easy to operate, and that one Tone Bar doesn't disturb other Tone Bar
operation, and that Mark 8 is visible,
bl
Confirm that Keyboards are operational.
c)
Confirm that Expression Pedal is normal to operate and to stop at
will.
d)
Confirm that position of Knob Mark is normal.
e) Confirm that Pedal Keys are normal to operate.
f)
Confirm that Tab.s are normal to operate.
15
Assembly
a)
Confirm that Cabinet can be put on the Leg.
bj Confirm that Pedal Unit
can be smoothly inserted.
c)
Confirm that Knob Bolts can be set normally.