11
5.3 Effects Setting——EFF
1.
Strike the pad that you want to edit.
Use [+][-] buttons or [EDITOR] rotary to choose
the parameter, then press [RETURN] button.
Use[+][-] buttons or [EDITOR] rotary to edit the
specific values.
Press [RETURN] button again to save the
values.
Use [+][-] buttons or [EDITOR] rotary to choose
“EFF”,
Press [RETURN] button to enter effect interface.
Effect Interface
3.
4.
5.
6.
2.
40-88
0-127
0-127
0-127
0-127
0-127
0-127
Parameter Value Description
Coarse
Fine
Release
Volume
Pan
Reverb
Tone
Coarse tone, coarse tone select the pad tone
Fine tone, fine tone select the pad tone
Release time
Pad volume
Audiovisual positioning, set the pan of selected pad
Set the reverb of selected pad
Set the tone of selected pad
Effect
Parameter
The corresponding name will be displayed on
the left side of the title bar, and the pad icon will
also be displayed on the left side of the
interface.
Press [SET UP] button to enter setting interface.
To Next Page
Loading...
Need help?
General