What does it mean if the ON/OFF light flashes twice on my Handicare Scooter?
If the ON/OFF light flashes twice on your Handicare Scooter, it indicates a DX accessory fault. The module displays a fault as a result of a programming fault or short circuit and/or overload of the accessories.
What does it mean when the ON/OFF light flashes 6 times on my Handicare Scooter?
If the ON/OFF light flashes 6 times on your Handicare Scooter, it indicates that the m2 parking brake connection is faulty or loose, or the m2 parking brake is defective. Correct the connection if it's faulty or loose, or replace the drive motor if the parking brake is defective.
What causes an M1 Brake Error on my Handicare Puma 20?
An M1 Brake Error indicates a problem in the solenoid brakes or their connections. Check the solenoid brakes, cables, and connections to the control system. If the error persists, the Power Module may be defective.
What causes an M2 Brake Error on my Handicare Puma 20?
An M2 Brake Error indicates a problem in the solenoid brakes or their connections. Check the solenoid brakes, cables, and connections to the control system. If the error persists, the Power Module may be defective.
What does the M1 Motor Error mean on my Handicare Puma 20 Wheelchair?
The M1 Motor Error indicates that the control system has detected that a motor has become disconnected. Check the motors, cables, and connections to the control system. If the error persists after checking, the Power Module may be defective.
What does M2 Motor Error mean on my Handicare Puma 20?
The M2 Motor Error indicates that a motor has become disconnected. Check the motors, cables, and connections to the control system. If the error persists after these checks, the Power Module may be defective.
What does it mean if ON/OFF light flashes 4 times on Handicare Mobility Aid?
If the ON/OFF light on your Handicare Mobility Aid flashes 4 times, the cause may be related to the m2 motor. The m2 motor connection could be faulty or loose, so check the connection and secure it. The m2 motor itself might be defective and need replacement. There might also be a short circuit in the m2 motor connections, requiring correction. Additionally, a defective power module output could be the cause. Check the motor for any defects, as a power module output typically becomes defective due to a motor issue. Replace the power module only if the fault occurs immediately upon switching the unit on. If the fault occurs when you start driving, the entire left-hand motor circuit is likely causing the fault, in which case you should replace the entire drive unit concerned.
What does Right Lamp Short mean on my Handicare Scooter?
A 'Right Lamp Short' on your Handicare Scooter indicates that the control system has detected a short in either of the Lamp Circuits. Check the lamps, cables, and connections to the control system. If the error persists after the above checks have been made, then the ISM may be defective.
What does it mean if the ON/OFF light flashes once on my Handicare Scooter?
If the ON/OFF light flashes once on your Handicare Scooter, it indicates a DX module fault. Replace one or more modules. The 'on/off' LED indicates the condition of the entire system.
What to do if the ON/OFF light flashes 5 times on Handicare Scooter?
If the ON/OFF light flashes 5 times on your Handicare Scooter, it indicates that the m1 parking brake connection is faulty or loose, or the m1 parking brake is defective. Correct the connection if it's faulty or loose, or replace the drive motor if the parking brake is defective.
General| Type | Power Wheelchair |
|---|---|
| Foldable | No |
| Footrests | Yes |
| Seat Width | 40-48 cm |
| Seat Depth | 40-48 cm |
| Backrest Height | 40-50 cm |
Advises on avoiding contact with hot motors and parts exposed to direct sunlight to prevent burns.
Warns users to avoid contact with moving components like motors and wheels to prevent injury.
Provides guidance on operating the wheelchair in various environments and outlines safety precautions.
Lists essential checks to perform before driving the wheelchair to ensure safe operation.
Explains safe procedures for transferring into and out of the wheelchair.
Instructions on operating the controller and joystick, handling curves, braking, emergency stops, and slope operation.
Crucial safety information and requirements for transporting the wheelchair in a vehicle.
Explains the correct procedure for fastening the seat belt to ensure occupant safety during transport.
Details the recommended schedule for daily, weekly, monthly, and annual maintenance tasks.
Covers battery types, charging procedures, and essential maintenance for optimal performance.
Lists common checks to perform if the wheelchair is not functioning correctly.
To Next Page
