What should I do if my Handicare Wheelchair displays 'Charging' as an error?
If an On-Board Charger is used: Disconnect the charger from the AC supply. If an Off-Board Charger is used: Disconnect the charger from the Wheelchair. If the trip is still present after the charger has been disconnected then the Joystick Module may be defective.
What does 'User Switch detached' mean on my Handicare Puma 20?
A 'User Switch detached' error means the Omni has detected that the User Switch has become disconnected. Check all cables and connectors between the Omni and the User Switch. If the error persists, the User Switch may be defective. If it is required to use the Omni without a User Switch being connected, then the parameter, Switch Detect, should be set to Off. If a User Switch is not used the responsibility for that decision lies with the healthcare professional.
What does 'SID Detached' mean on my Handicare Puma 20 Wheelchair?
A 'SID Detached' error means the Omni has detected that the Specialty Input Device (SID) has become disconnected. Check all cables and connectors between the Omni and the SID. If the error persists, check that the setting of the parameter, 9-Way Detect, is appropriate for the SID that is being used. For example, if the SID has no detect-link, then this parameter should be set to Off. If the error persists, the Input Device may be defective.
What does 'Memory Error' mean on my Handicare Puma 20 Wheelchair and how can I resolve it?
A 'Memory Error' is a non-specific memory error that could be caused by any of the modules within the system. Check all cables and connections and cycle the power. If the error persists and the system contains 3rd party Modules: Disconnect all the non PGDT modules and cycle the power. If this has cleared the error: Connect each 3rd party module in turn, cycling the power each time. If the error reappears after one of the power cycles then the last module to have been added to the system must be defective. If the error is still present, the PM may be defective.
What does 'DIME Error' mean on my Handicare Puma 20 and how can I fix it?
A 'DIME Error' indicates an identification conflict between two modules in the system. If a new module has been introduced: Disconnect the new module and cycle the power. If no error is present, connect the new module to the system and cycle the power. If the error reappears, the new module is the cause. If there have been no additions: Disconnect one module at a time and cycle the power.
What does 'Overtemp. (Actuators)' mean on my Handicare Puma 20 Wheelchair?
An 'Overtemp. (Actuators)' error indicates that the ISM’s actuator circuitry has become too hot. Allow the ISM to cool. If the ISM is frequently overheating, check the condition of the actuator motors and their connections.
What does 'Over Current' mean on my Handicare Puma 20?
An 'Over Current' error indicates that the ISM’s actuator circuitry has become too hot. Allow the ISM to cool. If the ISM is frequently overheating, check the condition of the actuator motors and their connections.
What does 'Right Indicator Lamp Failed' mean on my Handicare Puma 20 and how do I resolve it?
A 'Right Indicator Lamp Failed' error means the control system has detected a failure in either of the Indicator Circuits. Check the indicator bulbs, cables, and connections to the control system. If the error persists, the ISM may be defective.
What to do if service indicator flashes twice and ON/OFF light flashes three times on Handicare Mobility Aid?
If the service indicator flashes twice and the ON/OFF light flashes three times on your Handicare Mobility Aid, it could indicate a battery fault. Check the batteries and cabling, and try charging or replacing the batteries. Also, inspect the motor connections and cabling. Alternatively, the m1 motor may be defective, requiring replacement.
What does 'Right Indicator Lamp Short' mean on my Handicare Puma 20 Wheelchair and how can I resolve it?
A 'Right Indicator Lamp Short' means the control system has detected a short in either of the Indicator Circuits. Check the indicators, cables, and connections to the control system. If the error persists, the ISM may be defective.
General| Type | Power Wheelchair |
|---|---|
| Foldable | No |
| Footrests | Yes |
| Seat Width | 40-48 cm |
| Seat Depth | 40-48 cm |
| Backrest Height | 40-50 cm |
Advises on avoiding contact with hot motors and parts exposed to direct sunlight to prevent burns.
Warns users to avoid contact with moving components like motors and wheels to prevent injury.
Provides guidance on operating the wheelchair in various environments and outlines safety precautions.
Lists essential checks to perform before driving the wheelchair to ensure safe operation.
Explains safe procedures for transferring into and out of the wheelchair.
Instructions on operating the controller and joystick, handling curves, braking, emergency stops, and slope operation.
Crucial safety information and requirements for transporting the wheelchair in a vehicle.
Explains the correct procedure for fastening the seat belt to ensure occupant safety during transport.
Details the recommended schedule for daily, weekly, monthly, and annual maintenance tasks.
Covers battery types, charging procedures, and essential maintenance for optimal performance.
Lists common checks to perform if the wheelchair is not functioning correctly.
To Next Page
