AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS
H&S
DEALER PRE-DELIVERY CHECK LIST
After the 1460-1660 Hi-Capacity Rake has been completely set-up, check to be certain it is in correct
operating order before delivering to the customer. The following is a list of points to inspect. Check off each
item as you have made the proper adjustments and found the item operating satisfactorily.
Serial Number
(Dealer’s Name) Model Number
(Signature of Pre-Delivery Inspector) (Inspection Date)
DEALER DELIVERY CHECK LIST
This check list that follows is an important reminder of valuable information that should be passed on to the
customer at the time this Rake is delivered.
Check off each item as you explain it to the customer.
This delivery check list, when properly filled out and signed assures the customer that the Pre-delivery
service was satisfactorily performed.
Explain to the customer that the pre-delivery inspection was made.
Explain to the customer all the safety precautions they must excercise when operating this unit.
Explain raking and windrow width adjustments.
Explain to customer that regular lubrication is required for proper operation and long life of
machine. Show customer the lubrication section of Owner’s Manual.
Give the customer Owner’s Manual and make sure they read and understand all operating and
service instructions.
Record Serial Number on page 19 of this Manual.
Have customer sign a completed “Warranty Registration,” and mail it promptly.
Date Delivered Dealer’s Name
By
Signature of Original Buyer
-3-
All grease fittings have been lubricated
(See lubrication guide in this manual).
All mechanisms are operating trouble free.
Rake wheels touch ground in unison when lowered into position.
(rake sitting level)
All bolts and fasteners are tight.
All decals are in place and legible.
Note: Warranty is not valid until warranty card is completed and returned to H & S Mfg. Co., Inc.
(Remove Dealers File Copy At Perforation)
To Next Page
Loading...
