Hangar 9 F6F Hellcat 60 ARF - Required Tools and Adhesives

4
Required Tools and Adhesives
Tools
• Drill • Drill bits: 1/16" (1.5mm), 5/64" (2mm),
3/32" (2.5mm) 1/8" (3mm), 5/32" (4mm)
• Crescent wrench • Hex wrench: 9/64", 3/16"
• Hobby knife • Hobby scissors
• Phillips screwdriver (small) • Pliers
• Ruler • Side cutters
• Socket wrench: 11/32" • T-pins
Adhesives
• 6-minute epoxy (HAN8000) • 30-minute epoxy (HAN8002)
• Thin CA • Canopy glue
• Zap-A-Dap-A-Goo • Threadlock
Other Required Items
• Epoxy brushes • Felt-tipped pen or pencil
• Measuring device (e.g. ruler, tape measure) • Mixing sticks for epoxy
• Paper towels • Rubbing alcohol
• Masking tape • Sanding bar
• Sandpaper • Rotary tool w/sanding drum
• Sealing Iron (HAN101) • Covering Glove (HAN150)
• Sealing Iron Sock (HAN141)
Covering Colors
• Midnight Blue (HANU885)
• Sky Blue (HANU875)
• White (HANU870)
Required Field Equipment
• Propeller • Fuel
• Long Reach Glow Plug Wrench (HAN2510) • Metered Glow Driver w/Ni-Cd & Charger (HAN7101)
• 2-Cycle Sport Plug (HAN3001) • 2-Cycle Super Plug (HAN3006)
• 4-Cycle Super Plug (HAN3011) • Manual Fuel Pump (HAN118)