Get the fault information from three waysGet the fault information from three ways：：
–– Get fault information from the instrument: When the truck Get fault information from the instrument: When the truck has fault, the LED3(RED) indicatorhas fault, the LED3(RED) indicator
light is on, light is on, LCD displays fault type and code.LCD displays fault type and code.
–– Get fault information by switching in handheld programmer. Refer to Handheld Programmer.Get fault information by switching in handheld programmer. Refer to Handheld Programmer.
–– Get fault information by observe controller built-in LED indicator lights. Refer to LED StatusGet fault information by observe controller built-in LED indicator lights. Refer to LED Status
Indicator.Indicator.
––
To Next Page
Loading...
