Hanil FLETA 4 - Saving;Calling up a Program -15

④ Press the Enter ( ) button.
Saving a program
① Set the centrifugation time/speed/Accel/Decel values.
② Press Program ( ) button once.
▶You can store 10 programs on the device: 0~9
③ Select the program number by pressing the Up( ) or Down( ) button.
Calling up a program
① Press the Program ( ) button twice.
② Select the program number by pressing the Up( ) or Down( ) button.
③ Press the Enter ( ) button to call up a program.
4. Operation
4.10 Saving/Calling up a program
15
www.ihanil.com