EasyManuals Logo

Hanna Instruments HI 2211 User Manual

Hanna Instruments HI 2211
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
67
POWER CONNECTIONPOWER CONNECTION
POWER CONNECTIONPOWER CONNECTION
POWER CONNECTION
Plug the 12 VDC adapter into the power supply socket.
Notes: These instruments use non volatile memory to retain the
pH, mV, temperature calibrations and all other settings,
even when unplugged.
Make sure a fuse protects the main line.
ELECTRODE AND PROBE CONNECTIONSELECTRODE AND PROBE CONNECTIONS
ELECTRODE AND PROBE CONNECTIONSELECTRODE AND PROBE CONNECTIONS
ELECTRODE AND PROBE CONNECTIONS
For pH or ORP combination electrode connect to the BNC connector on
the back of the instrument.
For electrodes with a separate reference connect the electrode’s BNC to the
BNC connector and the reference electrode plug to the reference socket.
For temperature measurements and automatic temperature compen-
sation connect the temperature probe to the appropriate socket.
INSTRUMENT START-UPINSTRUMENT START-UP
INSTRUMENT START-UPINSTRUMENT START-UP
INSTRUMENT START-UP
Turn the instrument on by pressing the ON/OFF switch located
on the rear panel.
All LCD segments are displayed while the instrument performs a
self test.
pH MEASUREMENTSpH MEASUREMENTS
pH MEASUREMENTSpH MEASUREMENTS
pH MEASUREMENTS
Make sure the electrode and the instrument have been
calibrated together before taking pH measurements.
Submerge the electrode and the temperature
probe approximately 4 cm (1½”) into the sample
to be tested and stir gently. Allow time for the
electrode to stabilize.
The pH is displayed on the primary LCD and the temperature on
the secondary LCD.
If the pH reading is out of range, “----” will be displayed on the
LCD.
OPERATIONAL GUIDEOPERATIONAL GUIDE
OPERATIONAL GUIDEOPERATIONAL GUIDE
OPERATIONAL GUIDE
pH
C
SPECIFICATIONSSPECIFICATIONS
SPECIFICATIONSSPECIFICATIONS
SPECIFICATIONS
EGNAR
Hp00.61ot00.2
± )ylno1122IH(Vm9.993
± )ylno1122IH(Vm0002
C°0.021ot9.9
NOITULOSER
Hp10.0
)ylno1122IH(Vm1.0
)ylno1122IH(Vm1
C°1.0
YCARUCCA
F°86/C°02@
± Hp10.0
± )ylno1122IH(Vm2.0
± )ylno1122IH(Vm1
± )C°0.0010.0(C°5.0
1± )edistuo(C°
)rorreeborpgnidulcxe(
noitarbilaCHp
sreffub5,noitarbilactniop2ro1
elbaliava
)10.01,81.9,10.7,68.6,10.4(
noitasnepmocerutarepmeT
:morfcitamotuArolaunaM
)F°0.842ot2.41(C°0.021ot9.9
edortcelEHp)dedulcni(B1311IH
eborperutarepmeT)dedulcni(2667IH
ecnadepmitupnI01
21
smho
ylppusrewoP)dedulcni(retpadaCDV21
snoisnemiD)9.2x1.7x4.9(mm47x281x042
thgieW
;)bl5.2(gK1.1
)bl5.5(gK5.2redlohhtiwtik
tnemnorivnE
)F°221ot23(C°05ot0
gnisnednoc-nonHR%59.xam
ytnarraWsraey2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hanna Instruments HI 2211 and is the answer not in the manual?

Hanna Instruments HI 2211 Specifications

General IconGeneral
BrandHanna Instruments
ModelHI 2211
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals